3D Printing

Save Subscribe

Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

  • 2200mah-lego-stud
  • Feather-Lego-studs
  • Lego-door-hook
  • Lego-slide-studs
  • Lego-neon-0
  • Lego-neon-15
  • Lego-neon-30
  • Lego-neon-45

Additional optional parts

  • Feather-Lego-tubes
  • Lego-500-bat-pocket-studs

Fusion 360 Links

Slicing Parts

Slice with setting for PLA material. The parts were sliced using CURA using the slice settings below.

  • PLA filament 200c extruder
  • 0.2 layer height
  • 4% gyroid infill
  • 60mm/s print speed
  • 60c heated bed

Glue 

We use super glue to adhere the brick studs / tubes. Apply small even dots on one of the part, align both parts and gently press together. Allow to the parts the dry for at least 10 mins before use.

 Code Assemble 

This guide was first published on Aug 12, 2020. It was last updated on Aug 12, 2020.

This page (3D Printing) was last updated on Aug 10, 2020.

Text editor powered by tinymce.