Parts are optimized to print on a Makerbot Replicator 2 and sliced with Makerware. Download the parts from thingiverse and print them out using the recommended settings below.

NinjaFlex

The spikes are hollow and designed to be printed in Ninjaflex filament. The STL files come in three different size, large, medium and small. Each spike includes two sewable tabs for easily attaching to your hoodie or costume.
stegospike-large.stl
stegospike-medium.stl
stegospike-small.stl
Ninjaflex @225
%15 infill
2 shells
0.2 layer height
45/150 speeds
Takes about 10-15 minutes for each spike

This guide was first published on Apr 09, 2014. It was last updated on Apr 09, 2014.

This page (3D Print Spikes) was last updated on Apr 08, 2014.

Text editor powered by tinymce.