CAD Files
CAD Parts
Individual 3MF files for 3D printing are oriented and ready to print on FDM machines using PLA filament. Original design source files may be downloaded using the links below.
CAD Assembly
A set of four rails are fitted onto the four stiles with the dovetails sliding into corresponding groves.
The bottom panel snap fits onto the lower rails.
A set of four panels slide in between the stiles.
Another set of rails are fitted over the panels and slide in between the stiles.
The CircuitPlayground PCB snap fits onto the bottom cover.
The top panel is fitted into the recess on the top cover.
The top cover locks onto the upper set of rails.
Frame Parts
The frame requires multiple copies of the stiles and rails. Use the 3MF file Stile and Rails Set.3mf to print a full set of parts needed to build the frame. Otherwise, you can print each part individually.
- 7x rails
- 1x cable rail
- 4x stiles
Build Volume
The parts require a 3D printer with a minimum build volume of 124 (X) x 124 (Y) x 136mm (Z).
Multi-color Panels
This guide assumes an AMS multi-color capable 3D printer is being used. The panels are in the 3MF file format, which includes bodies, colors and slicing meta data. You can choose any four colors of filaments you'd like and have the option to change the colors for each body. List of filaments used are linked below.
Page last edited February 24, 2026
Text editor powered by tinymce.
