For this project you will need:
  • Shoes: we used a pair of Adidas JS Wings
  • Litex LED ribbon in white or black - two reels or one reel and a spare battery case
  • Double-stick tape
  • Painter's tape (blue tape)
  • E6000 craft adhesive
  • Plain thread to match your shoes (or clear)
You will also need the following tools:
Use a sewing needle to affix the battery pack, and even the ribbon, if you so chose!
Sharp scissors are a must.
Tweezers help put everything exactly where it goes.

This guide was first published on Aug 20, 2013. It was last updated on Aug 20, 2013.

This page (Tools & Supplies) was last updated on Aug 20, 2013.

Text editor powered by tinymce.