3D Printed Glowing Ornament
Build a glowing snowflake ornament with Adafruit nOOds LED noodles! Use four strands of LED noodles and a coin cell battery holder to create a light up ornament.
Coin Cell Powered
This battery holder houses two CR2032 coin cells and is conveniently secured to the back of the snowflake so you can quickly get to it.
The battery holder has a built-in switch so you can easily turn it off to preserve the batteries.
Prerequisite Guides
Take a moment to review the following guides.
Our favorite food when hacking on code or electronics is a hot bowl of noodles - and around NYC these are often called 'noods'! What we've got here are flexible LED...
$4.50
In Stock
Our favorite food when hacking on code or electronics is a hot bowl of noodles - and around NYC these are often called 'noods'! What we've got here are flexible LED...
$7.50
In Stock
This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds two 20mm coin cells (2032 or CR2032 are the most popular size) in series to generate 6V...
$1.95
In Stock
For a really long time we assumed that the JST PH didn't have a free-hanging male header version. But then we found this JST-PH 2-pin Male Cable, and we were...
$0.75
In Stock
A perfect match for our sew-able coin cell holder. This non-rechargeable coin cell is CR2032 sized: 20mm diameter, 3.2mm thick. It...
$0.95
In Stock
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
$4.95
In Stock
