CAD Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below:

  • coupler top.stl
  • coupler bot.stl
  • mount plate bot.stl
  • mount plate top.stl
  • bottom cover.stl
  • perma mount.stl
  • case.stl
  • battery clip.stl
  • top cover.stl
  • handle.stl
  • noodle holder.stl

Build Volume

The parts require a 3D printer with a minimum build volume.

  • 90mm (X) x 90mm (Y) x 50mm (Z)

Plastic Film Sheet

Use a sheet of transparent film or PET material to create the outer glass container. Use a hobby knife to cut a piece of film down to size.

  • 114mm (4.5in) x 200mm (7.8in)
  • Material Thicknes: 1mm or less
Be careful cutting with a hobby knife and use eye protection. Young makers should be assisted by an adult.

CAD Assembly

Each LED Noodle is press fitted into a holder. The holders are secured together with two standoffs and mounting plates for top and bottom. The main case is secured to the bottom mounting plate. Top and bottom couplers are secured to the accompanying mounting plates. The Perma-Proto circuit is secured to the perma mount. The perma mount is secured to the bottom cover. The bottom cover is secured to the case. The top cover is secured to the top coupler. The handle is secured to the the top cover.

Design Source Files

The project assembly was designed in Fusion 360. This can be downloaded in different formats like STEP, STL and more. Electronic components like Adafruit's boards, displays, connectors and more can be downloaded from the Adafruit CAD parts GitHub Repo.

This guide was first published on Oct 05, 2022. It was last updated on Jun 17, 2024.

This page (CAD Files) was last updated on Mar 08, 2024.

Text editor powered by tinymce.