Unique LED Bulb
You can build an Victorian-era inspired lamp using an LED Noodle and 3D printed parts.
This features a 12V LED noodle that’s shaped in a zigzag pattern that wraps around a transparent 3D printed core. A glass dome fits over the LED giving this a unique aesthetic.
USB-C Power Delivery
The HUSB238 breakout is a power delivery board that lets you power devices using USB-C wall adapters with multiple voltages.
This features the HUSB238 chip, STEMMA QT for I2C control, screw block terminals and dip switches so you can easily toggle your preferred voltage.
Light Switch
Mounted inside the base is a 3D printed switch that is inspired by the humble household light switch. It’s a print-in-place part that has a really satisfying click that lets you turn the lamp on and off.
USB PD power supply must be able to supply 12V at 1A minimum.
Hardware
- 4x M2.5 x 6mm long steel screws
- 10x M3 x 6mm long steel screws
- 4x M3 x 10mm long steel screws
- 2x M3 x 20mm long steel screws
- 2x M3 hex nuts
PLA Filament
Choose your own preferred brand and colors of filament. The colors listed below were used in this project.
Page last edited September 11, 2024
Text editor powered by tinymce.
