Build neon-like signs using NeoPixel LEDs and 3D Printing! Use QT Py RP2040 and CircuitPython to make LED animations that bring them to life!

These strips feature flexible silicone diffusion for a neon look, with the individual addressable capabilities of NeoPixels. 

We 3D printed some signs that allow you to use the full meter long strip of NeoPixels.

It’s a simple easy press fit installation so there’s no need for cutting or splicing.

The four designs use a 1 meter strip to make simple shapes designed to fit on the bed of our 3D printer.

Prerequisite Guides

Take a moment to walk through the following guides.


Video of hand holding a QT Py PCB in their hand. An LED glows rainbow colors.
What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite chip, the RP2040. It's been made famous in the new
In Stock
Hand flexing Flexible Silicone Neon-like Skinny NeoPixel LED Strip
You love NeoPixels, and you love silicone diffusion? Peep this Flexible Silicone Neon-like Skinny NeoPixel LED Strip! OK it's a bit of a mouthful, but check...
In Stock
Angled shot of a pink/purple woven USB cable plugged into a laptop port and a small dev board.
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also made for USB C for our modernized breakout boards, Feathers and more. 
In Stock
5V 2A Switching Power Supply with  USB-A Connector
Our 5V 2A USB power adapter is the perfect choice for powering single-board computers like Raspberry Pi, BeagleBone, or anything else that's power-hungry!This adapter was...
In Stock

This guide was first published on May 10, 2022. It was last updated on 2022-05-10 22:55:41 -0400.

This page (Overview) was last updated on May 13, 2022.

Text editor powered by tinymce.