Build neon-like signs using NeoPixel LEDs and 3D Printing! Use QT Py RP2040 and CircuitPython to make LED animations that bring them to life!

These strips feature flexible silicone diffusion for a neon look, with the individual addressable capabilities of NeoPixels. 

We 3D printed some signs that allow you to use the full meter long strip of NeoPixels.

It’s a simple easy press fit installation so there’s no need for cutting or splicing.

The four designs use a 1 meter strip to make simple shapes designed to fit on the bed of our 3D printer.

Prerequisite Guides

Take a moment to walk through the following guides.


What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite chip, the RP2040. It's been made famous in the new
In Stock
You love NeoPixels, and you love silicone diffusion? Peep this Flexible Silicone Neon-like Skinny NeoPixel LED Strip! OK it's a bit of a mouthful, but check...
In Stock
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also made for USB C for our modernized breakout boards, Feathers and more. 
In Stock
Our 5V 2A USB power adapter is the perfect choice for powering single-board computers like Raspberry Pi, BeagleBone, or anything else that's power-hungry!This adapter was...
In Stock

This guide was first published on May 10, 2022. It was last updated on 2022-05-10 22:55:41 -0400.

This page (Overview) was last updated on May 13, 2022.

Text editor powered by tinymce.