Circuit Diagram

The diagram below provides a general visual reference for wiring of the components once you get to the Assembly page. This diagram was created using the software package Fritzing.

Adafruit Library for Fritzing

Adafruit uses the Adafruit's Fritzing parts library to create circuit diagrams for projects. You can download the library or just grab individual parts. Get the library and parts from GitHub - Adafruit Fritzing Parts.

Solder Terminal blocks

Solder 2.54mm/0.1" Pitch Terminal Block - 4-pin to make connections modular. 

These are compatible with the V2 3D printed case for the Mini Sparkle Motion with terminal cutout.

Ground on the matrix connects to G on the board

Input wire on the matrix connects to 33 pin on the board

5V on the matrix connects to 5V on the board

Power with USB Host cable

Connect a USB-A Plug to USB-C Plug Adapter into the Mini Sparkle Motion port.

Connect the A connector to the USB host socket. The MicroB OTG plug connects to the port on the DJI Mavic Pro.