3D Printed Parts

STL files for 3D printing will need to be oriented for printing using either FDM or SLS machines.

Parts were printed with PLA filament.

Original design source files may be downloaded using the links below.

3MF files include multicolor sections but a multicolor printer is not required. The sections have a .1mm indented so they can easily be painted with acrylic paints or markers.  

Slice with settings for PLA material

The parts were sliced using BambuStudio using the slice settings below.

• PLA filament 220c extruder
• 0.2 layer height
• 10% gyroid infill
• 200mm/s print speed
• 60c heated bed