There are lots of ways ot attach the n00ds to your mask. You can sew them on using clear fishing line -- the clear thread will disappear when the light shines through. Or if you prefer gluing, use silicone RTV adhesive to secure the n00d. These n00ds are coated in silicone so very few glues will stick to them. Hot glue can work for a while, but most craft glues simply won't grab hold.
I found the silicone glue worked really well, and I also found that weaving the n00d through the metal details on one of my masks worked great too, and allowed me to outline a shape on the mask without having to mess around with sticky glue.
Outline the eye holes on the inside of the mask to create an otherworldly glow that makes your eyes into magical portals of wonder.
Use hot glue to secure the battery holder to the mask someplace where it won't rub against your face. I added more hot glue above the wire connections just so my sweat won't short out the solder points.
Weaving the n00d through the mask details can work great too, but it can be a little tricky to get a smooth line. You'll also need to run BOTH ends of the n00d back to the battery pack, so be sure to use a wire color that matches your mask.
Use one battery holder for each n00d for the best performance.
Page last edited March 05, 2026
Text editor powered by tinymce.
