3D Printing

Save Subscribe

Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

  • puck-cover.stl
  • puck-btm.stl
  • hockey-blade.stl

Slicing Parts

Hockey Blade
Slice the Blade part with settings for PETG material. The parts were sliced using CURA using the slice settings below.

PETG filament
230c extruder
0.2 layer height
30% gyroid infill
70c heated bed

Circuit Playground Puck Case
Slice the Case parts with settings for TPU 98a material. The parts were sliced using CURA using the slice settings below.

TPU 98a filament
230c extruder
0.2 layer height
30% gyroid infill
50c heated bed

 Overview MakeCode 

This guide was first published on Dec 23, 2020. It was last updated on Dec 23, 2020.

This page (3D Printing) was last updated on Dec 22, 2020.

Text editor powered by tinymce.