Build a 3D printed LED headband inspired by Bo Katan from Star Wars.
This design features engraved details that wrap around the headband and uses an adjustable elastic strap to fit comfortably over a person's head.
The LEDs are powered by a coin cell breakout board hidden inside a 3D printed battery box on the end of the elastic strap.
These miniature LEDs come in a few different colors and they come pre-wired so they’re great for prop builders and model-makers.
The Adafruit coin cell breakout features an on/off slide switch, header pins and mounting holes for securing to your projects.
These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing...
$4.75
In Stock
These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing...
$4.75
In Stock
Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on, an on/off switch and 0.1" pitch breakout pins for easy connecting. Great for...
guides with product
$3.50
In Stock
A perfect match for our sew-able coin cell holder. This non-rechargeable coin cell is CR2032 sized: 20mm diameter, 3.2mm thick. It...
Out of Stock
4 x
M2.5x6mm Screws
M2.5x6mm Screws
1 x
Elastic band 1.5" wide
Elastic band 1.5" wide
2 x
Pinch Crimp Ends
Pinch Crimp Ends
Tools & Supplies
- Hot Glue & Hot Glue Gun
- Needle & Thread
- Hobby Knife
- Scissors
- Screwdriver
- Soldering Iron & Solder
Text editor powered by tinymce.
