Slice Settings

Download the STL file and import it into your 3D printing slicing software. You'll need to adjust your settings accordingly if you're using material different than PLA.

• 220C Extruder Temp
• No heated bed (65C for heated)
• 100% Extrusion Multiplier
• 0.48 Extrusion Width
• 20% infill
• No Raft or Supports

CAD Model

The deck was designed in Autodesk Fusion 360. You can download the source file and modify the design to make a custom board. The STL file is available to download if you want to print "as is" without any modifications.