These LED augmentations can help you with your cyberpunk costume or other design that requires glowing eyes. this is a super cheap, simple circuit comprised of a battery and LEDs. You will need patience and a steady hand, however.

Make sure your soldering iron has a fine tip and use SMD LEDs in size 1206. This size has about a 1mm distance between the terminal foot and the top of the acryllic cap, allowing a 1mm enamel wire to sit in that gap very comfortably.

This guide was first published on Oct 21, 2014. It was last updated on Oct 21, 2014.

This page (Overview) was last updated on Sep 25, 2014.

Text editor powered by tinymce.