Author Gravatar Image BECKY STERN
Light up your ride with some LED handlebars! You will need:
  • Soldering iron and solder
  • Wire strippers
  • Scissors
  • Needle and thread
  • Sewing machine (optional)
  • Measuring tape
  • Multimeter
  • Lighter (or heat gun-- for shrinking heatshrink tubing)
  • Utility or craft knife

This project was inspired by Mitchell Silva, who created GLOBARS with LEDs inside the handlebars.
Last updated on 2015-04-28 at 01.59.49 AM Published on 2012-07-29 at 03.58.38 PM