We stock a lot of chips and development boards that are able to do high quality digital I2S out, which makes for great quality audio playback. That's great when you have enough processing power to decode WAVs or MP3s in real time. However, most give you stereo...

You may have noticed that our RP2350 Feather has an FPC output connector on the end for accessing the HSTX (High Speed Transmission) peripheral. This new capability, not available on the RP2040, is specifically designed to allow the...

Connect this to that when a 22-pin FPC connector is needed. This 5 cm long cable is made of a flexible PCB. It's A-B style, meaning that pin one on one side will match with pin one on the other. How handy!We're stocking this to fit...

Breakaway header is like the duct tape of electronics. It's great for connecting things together, soldering to perf-boards, fits into any breakout or breadboard, etc. We go through these guys real fast, and thought that given how handy they are, we'd offer them in a pack of ten!

If you'd like to connect a USB-host-capable chip to your USB peripheral, this cable will make the task very simple. There is no converter chip in this cable! It's basically a plain USB cable that's cut in half and with jumper sockets on the power and data...

We were catching up on a recent hackaday hackchat with eben upton and learned some fun facts: such as the DVI hack for the RP2040 was inspired by

This is a mouse.  A nice, simple mouse.  No bells or whistles.  Just a mouse.But that doesn't mean it's not the best simple mouse!  We compared a few and liked this one quite a bit.  It's optical for good resolution and precision, has two...

Seamlessly transmit high-quality stereo audio with this 3.5mm Male/Male Stereo Cable. Ideal for "passing the AUX cord," or connecting audio devices such as smartphones, tablets, MP3 players, car stereos, portable speakers or any other...

We love the Raspberry Pi 4 and 5, with their fancy new USB Type C power connectors. Now we have an even better power supply that can be used with either Pi 4 or even a Pi 5 with 5V output, 3A of current to handle builds with accessories and displays. The vertical-style plug...

This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also made for USB C for our modernized breakout boards, Feathers, and more.  If you want something just like it but for Micro B, we...

Connect two HDMI devices together and save space with this slim, high quality HDMI cable. It has nice molded grips for easy installation and is 914mm long (~3 feet). Sporting a teeny 4mm diameter this cable stays out of your way!We also have slim HDMI cables at

Add some extra boom to your audio project with these powered loudspeakers. We sampled half a dozen different models to find ones with a good frequency response, so you'll get quality audio output for music playback. Simply connect the standard 3.5mm stereo plug into your Raspberry Pi model...

By popular demand! We now have the plates from the ARDX available separately. Acrylic plate is engraved and cut here at the Adafruit factory. There are mounting holes for your Arduino and a...

This is a box of six 25ft spools of stranded-core wire. Stranded-core wire is best used for wiring jigs where there's bending or movement expected. It also works well with terminal blocks. It's not great...

This is a cute, half-size breadboard with 400 tie points, good for small projects. It's 3.25" x 2.2" / 8.3cm x 5.5cm with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the breadboard as...

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit almost all of the Adafruit breakout/dev board mounting holes...