Prepare the header strip:Cut the strip to length if necessary. It will be easier to solder if you insert it into a breadboard - long pins down |
|
Add the FeatherWing:Place the featherwing over the pins so that the short pins poke through the two rows of breakout pads |
|
And Solder!Be sure to solder all pins for reliable electrical contact.
Start by soldering the first row of header |
|
Now flip around and solder the other row completely |
|
You're done with the two header strips.
Check your solder joints visually and continue onto the next steps |
|
OK You're done! You can now plug your FeatherWing into your Feather and get your JOY on! |
Assembly
This guide was first published on Oct 25, 2017. It was last updated on Oct 25, 2017.
This page (Assembly) was last updated on Feb 12, 2021.
Text editor powered by tinymce.