This guide was written for the Gemma v2 board, but can be done with either the original or Gemma M0. We recommend the Gemma M0 as it is easier to use and is more compatible with modern computers!
What would an electric kanzashi look like? That was the question I was considering when I designed this piece. The simple circular shapes of the Jewel and GEMMA brought the answer. You'll be using plenty of crafting skills, with a wee bit of tools for this beginner's project. The hardest part will be choosing the colors you want for your ornament.
- The GEMMA M0 is recommended over the GEMMA v2. Either will work.
- NeoPixel Jewel
- LiPoly Battery 100mAh
- A Micro Lipo or other small lipoly battery charger at 100mAh rate
- Silicone Wire in fave color (at least 1 ft.) - You can try using conductive thread but we prefer silicone wire for stronger connections!
- USB Cable A/Micro B
- Needlenose Pliers
- Felt Scrap (6"x6")
- Jewelry Findings - 2" Head Pins (3)/Eye Pins (1)
- Jewelry Findings - Jump Ring (1)
- Crystal Beads - 4 mm (1 pack)
- Silver Beads - 6 mm (1 pack)
- Embroidery Floss (1) or scrap piece 24"
- Embroidery Needle
- Chopstick
- Sandpaper
- Hobby knife or small saw
- Gloss Acrylic Paint (1)
- Clear Nail Polish
- Small Paint Brush
- Scrap cardboard (3"x3")
- Hot glue gun
Make sure you take the time to read the following guides. Jewel is a type of NeoPixel cluster and operates similarly to the other NeoPixel products.
