wFL Case
3D Print an enclosure to fit the ItsyBitsy ESP32. This case features mounts and port openings for a wFL antenna, STEMMA boards, and header access!
STEMMA Mounts
Fit sensors and more on the front vents for easy mounting!
Header Access
Quickly prototype projects with jumper cables or on a breadboard with header access on the case!
Web Workflow
ItsyBitsy ESP32 does not have native USB support - instead, there's a USB to serial converter chip. This means it cannot act like a USB keyboard or mouse, but it does have Bluetooth BLE and BT classic, so you can use it wirelessly!
What's smaller than a Feather but larger than a Trinket? It's an Adafruit ItsyBitsy ESP32 with a wFL external Antenna Connection, a powerful...
guides with product
$14.95
In Stock
What's smaller than a Feather but larger than a Trinket? It's an Adafruit ItsyBitsy ESP32, a powerful processor PCB with a plethora of pins! It features...
guides with product
$14.95
In Stock
Most antennas have SMA or RP-SMA connectors on them, how are you going to connect them to your little RF module? This little cable will bridge the two!This adapter cable is...
Out of Stock
This 4"/100mm long swivel dipole antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter such...
$6.95
In Stock
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but...
Out of Stock
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also fully reversible! That's right, you will save seconds a day by...
$3.95
In Stock
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker...
guides with product
$16.95
In Stock
Text editor powered by tinymce.
