ISS Pin

by Leslie Birch

published April 17, 2017, last edited April 17, 2017

posted in LEDs Wearables Internet of Things - IOT

Save Download

35

Intermediate

Project guide

Solder Circuit

Insert the pins of the Photon through the NeoPixel ring board so there is a row of holes on the outside surrounding the microcontroller (basically aligning the microcontroller with the outline on the board).

Solder all pins on the reverse side being careful not to create bridges since the holes are close together. After soldering, snip the remaining length of the pins so you have a smooth back for your pin.

Page last edited September 15, 2016

Text editor powered by tinymce.

Search