Overview

In this project we finally update our popular bumper case design for the iPhone X!

 

We designed two different models to easily print with flexible or PLA materials. This bumper prints great with NinjaFlex but also works well with other flexible materials.

 

Features cutouts for camera, speakers and mute switch. Beveled buttons are on the side for adjusting the volume and power button.

 

Both models have padded backs to protect and level the camera bump on the back!

 

NinjaFlex and PLA filaments are both available in the Adafruit Shop!

Telescope Adapter

 

We've also updated our CELESTRON FirstScope Telescope adapter to fit the iPhone X.

 

Check the guide and download here: https://learn.adafruit.com/3d-printed-camera-tripod-adapter-for-telescope/3d-printing

 

This updated design utilizes the built-in telephoto lens to give the telescope a longer focal length while producing higher quality images with it optical image stabilized lens.

NinjaFlex - 1.75mm Diameter - Caramel Candy - 0.5Kg

PRODUCT ID: 2382
Looking beyond ABS? Tired of PLA? Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated...
$49.95
IN STOCK

NinjaFlex - 1.75mm Diameter - Sky Blue - .50 Kg

PRODUCT ID: 2563
Looking beyond ABS? Tired of PLA? Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated...
$49.95
IN STOCK

Blue Masking Tape for 3D Printing Plates

PRODUCT ID: 2416
OK yes, it's just masking tape. A big honkin' roll of I'm blue da-ba-dee-da-ba-die masking tape. Removing 3D printed parts can be tough. Sometimes pieces get stuck to your 3D...
$49.95
IN STOCK

Type A Machines Series 1 Pro 3D Printer

PRODUCT ID: 2412
Built to last and better than ever. The Series 1 Pro 3D printers from Type A Machines offer durability, modularity and one of the largest build volumes in...
$4,095.00
IN STOCK
Last updated on 2017-11-14 at 12.00.20 AM Published on 2017-11-14 at 12.00.16 AM