In this project we'll 3d print a bumper for the 11" iPad Pro (2018).
This bumper is 3D printed with flexible filament and will protect the edges and rear facing camera.
The design features a cutout for the USB-C port. Beveled buttons on the side allow easy press of the volume controls.
The frame is padded for protection and allows the tablet to be flush when placed on a flat surface. No more camera bump on the back!
NinjaFlex colors are available in the Adafruit Shop!
This guide was first published on Nov 21, 2018. It was last updated on Nov 21, 2018.
This page (Overview) was last updated on Jan 13, 2021.
Text editor powered by tinymce.