In this project we'll 3d print a bumper for the 11" iPad Pro (2018).
This bumper is 3D printed with flexible filament and will protect the edges and rear facing camera.
The design features a cutout for the USB-C port. Beveled buttons on the side allow easy press of the volume controls.
The frame is padded for protection and allows the tablet to be flush when placed on a flat surface. No more camera bump on the back!
NinjaFlex colors are available in the Adafruit Shop!
|
As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to Micro B plugs!USB C is the latest...
$2.95
In Stock
So you've got a cool/witty name for your band, a Soundcloud account, a 3D-printed Daft Punk...
$59.95
In Stock
Looking beyond ABS? Tired of PLA? Open a world of possibilities, limited only by your imagination. NinjaTek's Cheetah series, a cutting-edge filament for 3D...
Out of Stock
Looking beyond ABS? Tired of PLA? Open a world of possibilities, limited only by your imagination. NinjaTek's Cheetah series, a cutting-edge filament for 3D...
Out of Stock
The Ultimaker 3 is one of our favorite 3D printers on the market. It's a well-built open-source compact machine with an excellent UX. Every inch of the...
Out of Stock
OK yes, it's just masking tape. A big honkin' roll of I'm blue da-ba-dee-da-ba-die masking tape.Removing 3D printed parts can be tough. Sometimes pieces get stuck to...
Out of Stock
These are the best diagonal cutters, large super-comfortable grip to use and have strong nippers for perfect trimming of wires and leads. I've used my pair every day for years.
$7.25
In Stock
