Wiring

Save Subscribe

Make the following connections between the ADT7410 and the Feather Huzzah ESP8266

  • ADT7410 VIN to Feather 3V
  • ADT7410 GND to Feather GND
  • ADT7410 SCL to Feather SCL
  • ADT7410 SDA to Feather SDA
To easily plug in the Feather OLED on top, make sure to solder or select a Huzzah Feather with stacking headers
Photograph of Assembled Feather HUZZAH w/ ESP8266 WiFi With Stacking Headers.
Feather is the new development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller...
$19.95
In Stock
Add to Cart
Angled shot of a Stacking Headers for Feather - 12-pin and 16-pin female headers.
These two Female Stacking Headers alone are, well, lonely. But pair them with any of our Feather boards and...
$1.25
In Stock
Add to Cart

Adding the FeatherWing OLED may require soldering assembly - follow this page here for instructions.

 Adafruit IO Setup Arduino Code 

This guide was first published on Feb 11, 2019. It was last updated on Feb 11, 2019.

This page (Wiring) was last updated on Feb 07, 2019.

Text editor powered by tinymce.