Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

Slice with settings for PLA material 

The parts were sliced using CURA using the slice settings below.

• PLA filament 220c extruder
• 0.2 layer height
• 10% gyroid infill
• 60mm/s print speed
• 60c heated bed
  
  

Supports

• Support Extrusion Width: .2
• Support Density: 4%
• Support Overhang Angle: 50
• Support Z Height: .21
• Interface: On
• Support Roof: On
• Support Pattern: Zig Zag

Build Plate Adhesion

• Type: brim
• Line Count: 6