You can build your own IoT Pool Monitor using Adafruit IO and WipperSnapper.
This can help you keep track of water temperatures by logging and plotting data to a dashboard!
All of the electronics are housed in a clear sealed enclosure that is also water resistant.
This project is powered by the Feather ESP32-S2 running WipperSnapper, Adafruit’s no-code solution to IoT Projects.
Just stick the DS18B20 wire in the pool to monitor how warm it is and log that data in a custom dashboard.
With WipperSnapper you can create a beautiful dashboard with gauges and charts so you can visually monitor the warmth of your pool!
What's Feather-shaped and has an ESP32-S2 WiFi module? What has a STEMMA QT connector for I2C devices? What has your favorite Espressif WiFi microcontroller and lots of Flash and...
guides with product
$17.50
In Stock
This is a pre-wired and waterproofed (with heat shrink) version of a 1 Wire DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the...
$9.95
In Stock
Store your project safe and sound in this nice weatherproof box with a clear top. We picked up this box because we like the machinable ABS plastic body and tough clear polycarbonate...
$9.95
In Stock
Need a big battery for your project? This lithium-ion pack is made of 2 balanced 2200mAh cells for a total of 4400mA capacity! The cells are connected in parallel and spot-welded to a...
Out of Stock
These are for freebies only! If you like to purchase one for yourself, here's the store version! https://www.adafruit.com/product/3980
$99.00
In Stock
As technology changes and adapts, so does Adafruit. This USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$4.95
In Stock
Page last edited March 08, 2024
Text editor powered by tinymce.
