3D Printed Case

Save Subscribe

As an option we have included STL files for a 3D printed case. They are available in the "CAD_files" folder of the GitHub repository you've already downloaded.

Disconnect any USB cords you have attached. Drop the assembly into the bottom part of the case. Snap fit the lid on top.

internet_of_things___iot_IRHat2_Board_v7.png
internet_of_things___iot_IRHat2_Board_v15_with_case.png
internet_of_things___iot_IRHat2_Board_v15_case_and_lid.png
internet_of_things___iot_case.jpg
 Final Configuration Steps

This guide was first published on Apr 17, 2021. It was last updated on Mar 29, 2021.

This page (3D Printed Case) was last updated on Apr 15, 2021.

Text editor powered by tinymce.