3D Printed Parts

STL files for 3D printing will need to be oriented for print using either FDM or SLS machines.

Parts were tested using with PLA filament.

Original design source files may be downloaded using the links below

Slice with Settings for PLA material 

The parts were sliced using CURA using the slice settings below.

  • PLA filament 200c extruder
  • 0.25 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed

This guide was first published on Jul 02, 2024. It was last updated on Jul 03, 2024.

This page (3D Printing) was last updated on Jul 02, 2024.

Text editor powered by tinymce.