Angled shot of Bluetooth programmer board.
The Bluefruit LE Friend is your new BLE BFF! This USB-to-BLE board makes it easy to get your computer talking to your BLE-enabled phone or tablet using a standard serial/UART...
Out of Stock
SEGGER J-Link JTAG/SWD Debugger brick and JTAG cable
The SEGGER J-Link EDU is identical to the more expensive J-Link BASE model except for the terms of use.If...
Out of Stock
SEGGER J-Link JTAG/SWD Debugger brick and JTAG cable
The SEGGER J-Link BASE is identical to the cheaper J-Link EDU model except for the terms of...
Out of Stock
10-pin 2x5 Socket-Socket 1.27mm IDC Cable
These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. We see these connectors often on ARM...
$2.95
In Stock
JTAG (2x10 2.54mm) to SWD (2x5 1.27mm) Cable Adapter Board
This adapter board is designed for adapting a 'classic' 2x10 (0.1"/2.54mm pitch) JTAG cable to a slimmer 2x5 (0.05"/1.27mm pitch) SWD Cable.  It's helpful...
$4.95
In Stock
Front cover of "Getting Started with Bluetooth Low Energy" by Kevin "KTOWN" Townsend. Cover art is a detailed black-and-white illustration of a bird.
You're interested in what all this BLE stuff is about, anyways? Let Adafruit's lead Engineer, Kevin "KTOWN" Townsend (a.k.a "50 Ohm") guide you in this...
Out of Stock