This project shows how to make a talking map, allowing the history contained within a map to be tangible and interactive.
Using conductive paint, a Circuit Playground Express can be connected to different points on a map and provided with short audio clips to play when those areas on the map are touched.
The Circuit Playground Express can connect to externally powered speakers via the audio jack, allowing you to play audio from the board at your preferred volume.
Adafruit's USB powered speakers are excellent for this purpose, though you are welcome to use your own too.
Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and...
guides with product
$24.95
In Stock
Bare Conductive Paint is a multipurpose electrically conductive material perfect for all of your DIY projects! Bare Paint is water based, nontoxic and dries at room temperature.
Out of Stock
Add some extra boom to your audio project with these powered loudspeakers. We sampled half a dozen different models to find ones with a good frequency response, so you'll get...
$9.95
In Stock
Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors....
$3.95
In Stock
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or...
$2.95
In Stock
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about...
$1.95
In Stock
Battery power for your portable project! These batteries are good quality at a good price, and work fantastic with any of the kits or projects in the shop that use AAA's. This is a...
$1.50
In Stock
Page last edited March 08, 2024
Text editor powered by tinymce.
