Ikea Vindriktning Hack with QT Py ESP32-S3 and Adafruit IO

by Liz Clark

published July 05, 2023, last edited January 22, 2025

posted in Hacks Sensors/ Temperature & Humidity Internet of Things - IOT/ Adafruit IO CircuitPython Breakout Boards/ WiFi

Save Download

33

Intermediate

Project guide

Disassembly

Using a long and thin screwdriver, remove the four screws from the back of the air quality monitor.

Slide out the front panel of the air quality monitor. You'll see the PM1006 module and fan plugged into the PCB.

Unplug the PM1006 and fan connectors from the PCB.

Remove the three screws mounting the PCB to the front panel.

Lift the PCB out of the front panel. Now you're ready for soldering.

Page last edited March 08, 2024

Text editor powered by tinymce.

Search