Ice Tube Clock Kit

published March 06, 2013, last updated March 06, 2013

Intermediate

Project guide

Set Time

To tell time, you'll need to set up the clock first! Be sure to set the region first which will make it easier for you to set the time properly

Press the MENU button until Set time is displayed.

Now press the SET button to change the time.

The current time is shown (5:07:46 am), with dots on the hour.

If you're in 12hr mode, be sure to look for the dot on the left hand corner that will indicate PM for example, this is 5:07:41 PM.

Press the + button to change the hours. You can hold down + to quickly spin through the numbers.

Then press SET to set the hours and go on to set the minutes. The dots will move to the middle numbers:

Press the + button to change the minutes. You can hold down + to quickly spin through the numbers.

Then press SET to set the hours and go on to set the seconds. The dots will move to the last numbers:

Press the + button to change the seconds. You can hold down + to quickly spin through the numbers.

Finally, press SET to finish setting the time

Press the MENU button until Set time is displayed.

Now press the SET button to change the time.

The current time is shown (5:07:25 pm), with dots on the hour.

In 24hr mode, the PM dot is not used, instead the time is shown in 0-23hr notation.

Press the + button to change the hours. You can hold down + to quickly spin through the numbers.

Then press SET to set the hours and go on to set the minutes. The dots will move to the middle numbers:

Press the + button to change the minutes. You can hold down + to quickly spin through the numbers.

Then press SET to set the hours and go on to set the seconds. The dots will move to the last numbers:

Finally, press SET to finish setting the time.

Text editor powered by tinymce.