“I voted” stickers are so last election. This year, kick things up several notches by using a medium that commands real attention - electronics!

Spread the word by creating your own interactive election wearable using a Feather + OLED Featherwing. Once you’ve cast your ballot, tap a button to change the text from “I VOTE” to “I VOTED!” and show your democratic participation off to the world.

What you'll need

Adafruit Feather M0 Express - Designed for CircuitPython

We love all our Feathers equally, but this Feather is very special. It's our first Feather that is specifically designed for use with CircuitPython!...

Adafruit FeatherWing OLED - 128x32 OLED Add-on For Feather

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to...
1 x Short Male Headers
Short Feather Male Headers - 12-pin and 16-pin Male Header Set
1 x Short Female Headers
Short Headers Kit for Feather - 12-pin + 16-pin Female Headers
1 x Lipoly Battery
Lithium Ion Polymer Battery
1 x Pin Back
Silver Pin Back with Foam Adhesive
1 x USB Micro Cable
For programming Feather
1 x Soldering Iron
Adjustable 30W 110V soldering iron
1 x Solder
Mini Solder spool - 60/40 lead rosin-core solder 0.031" diameter
1 x Breadboard
Half-size breadboard
This guide was first published on Sep 21, 2020. It was last updated on Sep 21, 2020.
This page (Overview) was last updated on Sep 16, 2020.