Electronics Parts
- Huzzah ESP8266 Breakout
- Monochrome 1.3" 128x64 OLED graphic display
- USB micro-B breakout
- 2 x 1-pin male headers (these are included in the above breakouts)
- 6-pin right angle header (cut from one of these)
- thin wire
- MicroUSB cable (for powering the clock)
- 5V 2A USB port power supply (if you don't want to just power the clock from your computer's USB port)
- A web server running a small PHP script. You can even use a Raspberry Pi running locally on the network or any web hosting service you use.
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full...
guides with product
$9.95
In Stock
These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels,...
guides with product
$19.95
In Stock
Simple but effective - this breakout board has a USB Micro-B connector, with all 5 pins broken out. Great for pairing with a microcontroller with USB support, or adding USB 5V power to...
guides with product
$1.95
In Stock
Enclosure Parts
- 2 x laser-cut acrylic pieces (download vectors from repository)
- 3 x 1" 2-56 screws
- 1 x 3/4" 2-56 screw
- 2 x 1/4" 2-56 screw
- 15 x 2-56 hex nuts
- 2 x 3/16" nylon spacers
Tools
- a computer which can program the Trinket Pro 5V
- FTDI cable (for programming the Huzzah breakout)
- a soldering iron
- solder
- wire strippers
- diagonal cutters
- small flathead screwdriver (2.4mm)
Page last edited March 08, 2024
Text editor powered by tinymce.
