Overview

We present our PVA Dual Extrusion torture test!

This D20 moves freely inside the frame of a larger D20. This makes it easy to roll without covering numbers up and adding additional random spins to a throw!

To up the torture test, we added an even smaller D20 inside a D20 frame inside a dodecahedron! 

 

To remove the supports, we used dissolvable PVA material to act as scaffolding to hold the smaller D20 as it prints it the air!

PVA (polyvinyl alcohol) is a 3D printing material commonly used to create water-soluble support structures to achieve complex geometries. We have extensively tested preconfigured Ultimaker Cura profiles for optimal results when printing PVA support structures in combination with PLA material.

PVA is safe to print when using the recommended temperatures listed. To ensure a comfortable and healthy environment, we recommend 3D printing in a well-ventilated area.

Ultimaker 3 - 3D Printer

PRODUCT ID: 3300
The Ultimaker 3 is one of our favorite 3D printers on the market. It's a well-built open-source compact machine with an excellent UX. Every inch of the...
$3,750.00
IN STOCK

PLA Filament for 3D Printers - 2.85mm Dia - Light Green - 1 Kg

PRODUCT ID: 3735
Having a 3D printer without filament is sort of like having a regular printer without paper or ink. And while a lot of printers come with some filament there's a good chance...
$39.95
IN STOCK

PLA Filament for 3D Printers - 2.85mm Diameter - Aqua - 1.0 Kg

PRODUCT ID: 3737
Having a 3D printer without filament is sort of like having a regular printer without paper or ink. And while a lot of printers come with some filament there's a good chance...
$39.95
IN STOCK

PLA Filament for 3D Printers - 2.85mm Diameter - Magenta - 1 Kg

PRODUCT ID: 3732
Having a 3D printer without filament is sort of like having a regular printer without paper or ink. And while a lot of printers come with some filament there's a good chance...
$39.95
IN STOCK
Last updated on 2018-04-25 at 08.41.31 AM Published on 2018-04-24 at 11.59.53 PM