Featured Products

Adafruit METRO M0 Express - designed for CircuitPython

PRODUCT ID: 3505
Metro is our series of microcontroller boards for use with the Arduino IDE. This new Metro M0 Express board looks a whole lot like our 
$24.95
IN STOCK

Adafruit ItsyBitsy M0 Express - for CircuitPython & Arduino IDE

PRODUCT ID: 3727
What's smaller than a Feather but larger than a Trinket? It's an Adafruit ItsyBitsy M0 Express! Small, powerful, with a rockin' ATSAMD21 Cortex M0...
$11.95
IN STOCK

Adafruit Feather M0 Express - Designed for CircuitPython

PRODUCT ID: 3403
We love all our Feathers equally, but this Feather is very special. It's our first Feather that is specifically designed for use with CircuitPython!...
OUT OF STOCK

Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE

PRODUCT ID: 3500
The Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot...
$8.95
IN STOCK

Adafruit GEMMA M0 - Miniature wearable electronic platform

PRODUCT ID: 3501
The Adafruit Gemma M0 is a super small microcontroller board, with just enough built-in to create many simple projects. It may look small and cute: round, about the...
$9.95
IN STOCK

Circuit Playground Express

PRODUCT ID: 3333
Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and...
$24.95
IN STOCK

SEGGER J-Link EDU - JTAG/SWD Debugger

PRODUCT ID: 1369
The SEGGER J-Link EDU is identical to the more expensive J-Link BASE model except for the terms of use.If...
$69.95
IN STOCK

SEGGER J-Link EDU Mini - JTAG/SWD Debugger

PRODUCT ID: 3571
Doing some serious development on any ARM-based platform, and tired of 'printf' plus an LED to debug? A proper JTAG/SWD HW debugger can make debugging more of a pleasure and...
$19.95
IN STOCK

USB cable - USB A to Micro-B

PRODUCT ID: 592
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or...
$2.95
IN STOCK

SWD (2x5 1.27mm) Cable Breakout Board

PRODUCT ID: 2743
This adapter board is designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for programming.  It's helpful for using...
$1.95
IN STOCK

Half-size breadboard

PRODUCT ID: 64
This is a cute half size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both...
$5.00
IN STOCK

Breadboarding wire bundle

PRODUCT ID: 153
75 flexible stranded core wires with stiff ends molded on in red, orange, yellow, green, blue, brown, black and white. These are a major improvement over the "box of bent...
$4.95
IN STOCK

Small Alligator Clip to Male Jumper Wire Bundle - 12 Pieces

PRODUCT ID: 3255
For bread-boarding with unusual non-header-friendly surfaces, these cables will be your best friends! No longer will you have long strands of alligator clips that are grabbing little...
$7.95
IN STOCK