Skip to main content
Print Your Own Circuit Boards Remove the Ink

Print Your Own Circuit Boards

Image for user akohring
by Adam Kohring
published June 23, 2015, last edited June 23, 2015
posted in Components Tools Programming
Save Link Note Download
43
Advanced
Skill guide

Remove the Ink

Using 100% Acetone (nail polish remover), wipe down the board to remove the ink over top the copper trails.

circuit_playground_adafruit.jpg

Page last edited June 04, 2015

Text editor powered by tinymce.

 Print the Top Board Design Drill Through Holes 
Related Guides
Bringing Back THE VOICE of Speak & Spell
By Phillip Burgess
beginner
Pro Trinket Tachometer
By Bill Earl
intermediate
Understanding microSD and SD cards: speeds,...
By Isaac Wellish
beginner
How to Add a New Sensor or Component to Adafruit IO...
By Brent Rubell
intermediate
Sino:bit with Arduino
By Dave Astels
beginner
All About Batteries
By lady ada
beginner
Programming SPI flash with an FT232H breakout
By Dean Miller
intermediate
Power Supplies
By lady ada
beginner
Adafruit HUSB238 USB Type C Power Delivery Breakout
By Liz Clark
beginner
Adafruit Motor Selection Guide
By Bill Earl
beginner
Digital Circuits 2: Some Tools
By Dave Astels
intermediate
Contribute to the Adafruit Learning System with Git...
By Anne Barela
intermediate
Geofencing with the FONA 808 & Adafruit IO
By M. Schwartz
beginner
Piezo Ring Tones with Raspberry Pi
By Roberto Marquez
beginner
3D-Printed Solder Paste Dispenser Hand Switch
By James DeVito
intermediate
Search

Search

Categories