3D Printing

Like

3D Printed Parts

Parts are designed to be 3D printed with FDM based machines. STL files are oriented to print "as is". Parts are listed below with file name and description. Parts require tight tolerances that might need adjusting slice setting. Reference the suggested settings below.

Slice Settings

Use these settings as reference. Values listed were used in Ultimaker's CURA 3.X slicing software.

  • 0.2mm Layer Height / 0.4mm nozzle
  • 0.4mm Line Width (inner & outer widths)
  • 40mm/s printing speed
  • 20% infill
  • Supports: No
  • Brim Line Count: 5
 Software Assembly 

This guide was first published on Oct 22, 2019. It was last updated on Oct 22, 2019.

This page (3D Printing) was last updated on Jan 15, 2021.