The diagram below provides a visual reference for wiring of the components. This diagram was created using the software package Fritzing.

Adafruit Library for Fritzing

Use Adafruit's Fritzing parts library to create circuit diagrams for your projects. Download the library or just grab individual parts. Get the library and parts from GitHub - Adafruit Fritzing Parts.

Scorpio Power

See this guide for more about powering Scorpio projects.

Wired Connections

The Feather RP2040 Scorpio is powered by 5V USB power supply. The NeoPixel strips should be powered separately a 5V 10A power supply. 

3-pin JST socket connectors are wired into a Perma-Proto board to allow the NeoPixel strips to plug into.

A wire is connected from the Feather RP2040 Scorpio ground pin to the ground rails on the Perma-Proto board.

The power and ground rails from the Perma-Proto are connected to a 2.1mm DC power jack.

A 2x8 IDC cable is used to connect the Feather RP2040 Scorpio to the Perma-Proto board.