Smart Outlet Controller
Build a custom controller to trigger a smart outlet using a Feather ESP32-S2, CircuitPython, Adafruit IO and the itsaSNAP app for iOS.
You'll use a large arcade button with an LED to toggle the lights on or off on a holiday tree or anything connected to a TP-Link Tapo Matter Smart Outlet.
3D print a festive candy cane inspired enclosure to house the arcade button and the Feather ESP32-S2.
What's Feather-shaped and has an ESP32-S2 WiFi module? What has a STEMMA QT connector for I2C devices? What has your favorite Espressif WiFi microcontroller and lots of Flash and...
guides with product
$17.50
In Stock
OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which...
$9.95
In Stock
Quick connector wire sets make wiring up our arcade-style or metal buttons quicky-quick. Each wire comes as a 'pair' with two 0.187" quick-connects pre-crimped. The wires...
$4.95
In Stock
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also made for USB C for our modernized breakout boards, Feathers and more.
$3.95
In Stock
Need a USB jack for charging or powering a project, but don't want to lug around a computer? This switching supply gives a clean regulated output at up to 1000mA! 110 or 240 input,...
$5.95
In Stock
It's the Internet of the Things! Adafruit IO+ is the easiest way to stream, log, and interact with your data. Whether you're...
$99.00
In Stock
Page last edited December 24, 2024
Text editor powered by tinymce.
