Circuit Playground Bluefruit CircuitPython Libraries

The Circuit Playground Bluefruit is packed full of features like Bluetooth and NeoPixel LEDs. Now that you have CircuitPython installed on your Circuit Playground Bluefruit, you'll need to install a base set of CircuitPython libraries to use the features of the board with CircuitPython.

Follow these steps to get the necessary libraries installed.

Installing CircuitPython Libraries on Circuit Playground Bluefruit

If you do not already have a lib folder on your CIRCUITPY drive, create one now.

Then, download the CircuitPython library bundle that matches your version of CircuitPython from CircuitPython.org.

The bundle download as a .zip file. Extract the file. Open the resulting folder.

Open the lib folder found within.

Once inside, you'll find a lengthy list of folders and .mpy files. To install a CircuitPython library, you drag the file or folder from the bundle lib folder to the lib folder on your CIRCUITPY drive.

Copy the following folders and files from the bundle lib folder to the lib folder on your CIRCUITPY drive:

  • adafruit_ble
  • adafruit_bluefruit_connect
  • adafruit_bus_device
  • adafruit_circuitplayground
  • adafruit_gizmo
  • adafruit_hid
  • adafruit_lis3dh.mpy
  • adafruit_thermistor.mpy
  • neopixel.mpy

Your lib folder should look like the image on the left.

Now you're all set to use CircuitPython with the features of the Circuit Playground Bluefruit!

This guide was first published on Dec 04, 2019. It was last updated on Dec 04, 2019.
This page (Circuit Playground Bluefruit CircuitPython Libraries) was last updated on Aug 09, 2020.