Arm Clamp

by Ruiz Brothers

Arm Heat Set

The arm uses four M3 heat set inserts to secure the pen clamp to the roller carriage. The photo to the right shows both sides of the part that have threaded inserts.

Clamp Heat Set

The clamp uses four M3 heat set inserts for securing a soldering iron. Use four M3 x 6mm button head metric machine screws to secure the cover over the mount.

Secure Arm to Clamp

Align the clamp mount and the arm together. Orient the mount with the arm so that the mounting holes line up. Insert and fasten two M3 x 8mm button head metric machine screws.
ROLLER ASSEMBLY Counter Weight
This guide was first published on May 07, 2019. It was last updated on May 07, 2019. This page (Arm Clamp) was last updated on Sep 19, 2019.