Build a 3D printed light up tombstone with an animated eye! Use the HalloWing M4 and NeoPixels to make a backlit sign with a custom message or spooky face! 

HalloWing M4

Use the HalloWing M4 with it's pumpkin spiced silkscreen to make this years projects really pop! Features the crispy IPS display, gobs of on-board sensors, and a nice assort of expansion ports. Create your own eye graphics and change them by swap out bitmap images.

3D Prints, Acrylic & Vinyl

The parts are designed to snap fit together and for support-free 3D printing! Use black LED acrylic to make a panel with vinyl graphics. The design features Victorian style aesthetic with floral ornaments and chamfered edges.

Parts

Angled shot of Adafruit HalloWing M4 Express.
This is Hallowing..this is Hallowing... Hallowing! Hallowing!  Following up on 2018's
$39.95
In Stock
Adafruit NeoPixel LED Strip with 3-pin JST PH Connector lit up rainbow
Plug in and glow, this Adafruit NeoPixel LED Strip with JST PH Connector has 30 total LEDs in a "60 LED per meter" spacing,...
$12.50
In Stock
LED RGB matrix 10.2" x 5.1" with "Adafruit Industries LED Matrix" text showing, and LED acrylic slowly covering to make it nicely diffused
 nice whoppin' rectangular slab of some lovely black acrylic to add some extra diffusion to your LED Matrix project. This material is 2.6mm (0.1") thick and is made of...
$5.95
In Stock
Lithium Ion Battery Pack with two round cells 3.7V 4400mAh with JST PH connector
Need a big battery for your project? This lithium-ion pack is made of 2 balanced 2200mAh cells for a total of 4400mA capacity! The cells are connected in parallel and spot-welded to a...
Out of Stock
USB cable - USB A to Micro-B - 3 foot long
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or...
$2.95
In Stock
1 x JST Cable with On/Off Switch
JST PH2 2-pin Extension Cable

This guide was first published on Oct 19, 2020. It was last updated on Mar 25, 2024.

This page (Overview) was last updated on Mar 08, 2024.

Text editor powered by tinymce.