The HalloWing PCB press fits into the face plate without screws and snap fits into the case. Speaker is housed in a back door with a working hinge. Parts 3D print without any supports!
No soldering necessary! HalloWing is pre-assembled and speaker is wired so it's plug-n-play! 3D print the case and snap fit everything together for easy assembly.
Adafruit's CircuitPython is great for making slide show galleries that playback audio and display images. Use the capacitive touch pads on the HalloWing for input commands. You can rapidly update your code without having to compile and there's plenty of libraries, examples and support. Store plenty of images and audio assets on the built-in 8Mb SPI flash storage.
If you're new to Adafruit Feather, CircuitPython or soldering, take a moment to walk through the following guides to get you started.
This project uses the Adafruit HalloWing M0 Express and a mini oval speaker. The speaker has a molex pico connector so it's plug-in-play!
My first computer was an Apple Mac Performa 6300. I remember attempting to fix a Macintosh 128k in middle school because I told my teacher I owned an Apple computer. I was not able to get it running.
Phil Torrone (Mr. Ladyada) comes up with the best project ideas!
a hallowing that just plays a sound and image of the mac it came from. the enclosure is a mac