In this project we're making a 3D printed case for the hallowing! We added spikes to design, making it easy to attach to pumpkins! This last minute halloween prop is easy to 3D print and stick onto almost any soft surface!
The Adafruit hallowing is a full tricked-out Feather M0 Express with sensors and a built in screen.
Our 3d printed case features spikes! These decorative and functional spikes allows you to attach to pumpkins! This is the cleanest way to decorate your pumpkin this year.
Prerequisite Guides
If you're new to Adafruit CRICKIT, Circuit Python and soldering, take a moment to walk through the following guides to get you started.
Eye Animation
The HalloWing M0 Express ships with a pre-programmed eye animation. Just plug in a lipo battery to the JST PH connector to power on the board. The HalloWing M0 Express can be programmed over microUSB – Also recharge the lipo battery. Additional eye animations can be quickly flashed to the board via a UF2 file. Follow the HalloWing guide to learn how to upload new eyes and code.
Page last edited March 08, 2024
Text editor powered by tinymce.
