Animation of Adafruit QT Py with onboard NeoPixel in a rainbow swirl.
What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with our favorite lil chip, the SAMD21 (as made famous in our GEMMA M0 and Trinket M0 boards).This time it...
$7.50
In Stock
Hand holding a Wiichuck controller pressing buttons. The controller is connected to the breakout wired to a Feather with OLED showing the streaming controller data
Dig out that old Wii controller and use it as a sleek controller for your next robot if you like. The Adafruit Adafruit Wii Nunchuck Breakout Adapter fits snugly into the Wii connector...
$2.95
In Stock
Adapter cable connecting NeoTrellis sequencer to iPad
Your iOS phone or tablet may not have a USB port on the bottom but that doesn't mean you can't use it to connect USB devices. Secretly known as a 'Camera Connector' or...
$17.50
In Stock
Angled shot of STEMMA QT / Qwiic JST SH 4-pin Cable.
This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of...
$0.95
In Stock
USB C to USB C cable. USB 3.1 gen 4 with E-Mark. 1 meter long
As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to USB C plugs!USB C is the latest...
$9.95
In Stock
Angled shot of a shot of USB A to USB C Adapter.
As technology changes and adapts, so does Adafruit, and speaking of adapting, this adapter has a USB A plug and a USB C socket so your older...
$2.95
In Stock