Livestream Studio is an incredibly robust streaming software. Regular keyboards and mice work, but for fast action and ease of use, you can't beat a dedicated piece of switching hardware with arcade buttons. Bluetooth and LiPo-battery powered, have access to everything you need to get your show switching with gusto.
At the Feather M0's heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip.
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don't have an onboard 250mA 3.3V regulator or level shifting, and aren't CE or FCC emitter certified....UNTIL NOW!
Feather is the new development board from Adafruit, and like it's namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8226 WiFi development boardwith built in USB and battery charging. Its an ESP8266 WiFi module with all the extras you need, ready to rock!
Feather is the new development board from Adafruit, and like it's namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather 32u4 with a BTLE module, ready to rock!
The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an accelerometer: Triple axis sensing, ±2g/±4g/±8g/±16g selectable scaling, both I2C and SPI interfaces, tap, double-tap, orientation & freefall detection, as well as 3 additional ADC inputs you can read over I2C
Feather is the new development board from Adafruit, and like it's namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather 32u4 Adalogger - our take on an 'all-in-one' datalogger (or data-reader) with built in USB and battery charging. Its an Adafruit Feather 32u4 with a microSD card ready to rock!
Candles are a fire hazard and blow out. Inexpensive LED candles are either just a constant light, or have little flicker. Using NeoPixels and an Arduino-compatible, we can create a more animated Jack-o-lantern. This very quick project uses multiple NeoPixels for each "flame" to create more color resolution and smooth out color transitions.
If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you! These displays are 1.5" and 2.4" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this graphic display for its crispness!
NeoPixels are plenty bright, suuuure. BUT ARE THEY 3 WATTS BRIGHT? No! They are not! That's why you need a Pixie. These chainable smart LEDs are not only super-smart, they are ridonkulously bright with 3W total, compared to 0.2W of a 'standard' NeoPixel. Designed by Ytai Ben-Tsvi, these are the ultimate in LEDs.