An IR distance sensor, Trinket M0, NeoPixel strip, and AudioFX sound board plugged into powered speakers combine to make a booby trapped candy bowl. The CircuitPython program measures the distance of objects in front of the IR sensor, and changes the LED colors to match. Then, when you get too close, it screams bloody murder!!
Everything you need to prototype an IoT device and connect it to Google IoT Core. This kit comprises a Raspberry Pi3, GPIO breakout cable, breadboard, cables and wealth of sensors and actuators. Google Cloud IoT Core is a fully managed service to easily and securely connect, manage, and ingest data from globally dispersed devices.
We've taken the original Circuit Playground Classic and made it even better! Not only did we pack even more sensors in, we also made it even easier to program. The board is round and has alligator-clip pads around it so you don't have to solder or sew to make it work. You can power it from USB, a AAA battery pack, or with a Lipoly battery (for advanced users). Circuit Playground Express has built-in USB support. Built in USB means you plug it in to program it and it just shows up, no special cable or adapter required. Just program your code into the board then take it on the go!
Put on your sunglasses before staring into these 72 configurable RGB LEDs, they are super bright! Arranged in a 6x12 matrix, each 2mm by 2mm sized RGB pixel is individually addressable. Only two pins are required to control all the LEDs. On the bottom we have jumpers for the Data and Clock lines so you can change them from the defaults. Works with any/all of our Feathers!
Did you know that the Arduino IDE can be used to program the micro:bit? Now you have yet another way to use this cool board! Learn how to set up Arduino to program your micro:bit, blink some LEDs, read the internal temperature sensor, send and receive data over Bluetooth - even log data to Adafruit.IO!
You can wire arcade buttons to the Gemma M0 which can be programmed in CircuitPython as a USB HID device (emulating keyboard strokes) to control any iCade compatible game on iOS! Plus, you can build your own stylish, rugged mini table using slotted aluminum extrusions and hardware! And, no soldering is required, just plug and play!
Build and code a radio communication system that notifies you of incoming messages, for example via automated puppet, and then displays the message on the Micro:Bit LED screen. No prior experience coding or using hardware is necessary. But! As this project involves communication (a two-way street), it’s a project for two or more people. Grab a friend, a micro:bit each, and build it together! Yayy collaboration! :D
The Basic String Car is a simple project that consists of a battery, motor, pulley, and a bit of fence wire. The initial design of the car was made from repurposed parts and materials found in Grandpa's basement workshop. This version uses some commercially-available parts, but could be hacked with parts gleaned from old CD players, for example. What modifications and improvements would you make?